Bloomfield WFPE-30F User Manual download pdf (Page 10)

3. Install the SUCTION TUBE O-RING, FILTER SCREEN, FILTER PAPER and FILTER PAPER

HOLDER into the FILTER RESERVOIR.

Install the assembled FILTER RESERVOIR into the fryer.

The O-RING for the filter reservoir

suction tube, and up to three spare

O-RINGS, are stored as shown:

STORAGE FOR 3

SPARE “O” RINGS

“O” RING IN

“O” RING GROOVE

FILTER

PAPER

HOLDER

FILTER

PAPER

FILTER

SCREEN

(clip inserts into

drain opening)

FILTER

RESERVOIR

ASSEMBLY

CROSS-SECTION VIEW

“O” RING

4. Install the DRIP PAN (item 17) into the mounting bracket behind the fryer door at the lower right

front of the fryer.

Note: Failure to install the DRIP PAN will allow the grease, moisture and other liquids that

accumulate on the fryer top panel to drip onto the floor, creating a SLIPPING HAZARD.

5. Close the DRAIN VALVE LEVER (item 11).

SLIPPING AND FALLING HAZARD / SPILLED OIL

DO NOT OPERATE UNLESS THE DRIP PAN IS INSTALLED.

Oil will drip onto the floor and falls will result. Death or serious injury may

result from slipping and falling in spilled oil.

SLIPPING & FALLING HAZARD / SPILLED OIL

CLOSE THE DRAIN VALVE BEFORE FILLING WITH OIL.

IF THE DRAIN VALVE IS OPEN, OIL POURED INTO THE KETTLE WILL

DRAIN INTO THE FILTER RESERVOIR OR ONTO THE FLOOR.

Oil spills may occur.

Death or serious injury may result from falls caused by slipping in oil

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

No comments

Bloomfield WFPE-30F User Manual Page 10