Bloomfield 9221EUFC Specifications download pdf (Page 10)

GETTING STARTED

Check the brewer and satellites:

Check that the brewer is clean and the drip tray (if used)

is empty.

Check that the satellites are empty and clean with lids

properly installed.

Check the spray heads:

Remove the brew chambers. Check the spray heads. Verify

that the spray disks are clean and properly installed. Verify

that the gaskets are properly installed inside the spray heads.

Check the brew chambers:

Check that the brew chambers are clean.

START-UP

Press POWER SWITCH (back of brewer) to ON. Brewer water

tank will begin filling.

When tank stops filling, press HEATER ON/OFF switch to ON:

READY-TO-BREW light will glow when water is at proper

temperature for brewing.

Press SATELLITE WARMER switches to OFF until ready to

begin brewing.

OPERATING INSTRUCTIONS

Fig. 3 Control Panel

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Bloomfield 9221EUFC Specifications Page 10